-
- 8. There are 2 screws in total on the front door. After removing the screws, use a pry – plate to remove the door panel
-
- 10. After removing the door panel, remove the heat – staked points of the original car’s mid – range speaker cover and take off the mid – range speaker cover.
-
- 19. Plug in the connector of the luminous cover plate. Make sure to make a connection at this connector. Otherwise, the ambient light will turn white after addressing.
-
- 28. There are 3 screws in the rear – door. After removing the screws, use a pry – plate to remove the door panel.
-
- 30. Use wire – cutters to remove the heat – staked posts, and then remove the mid – range speaker cover.




































Audi LED Ambient Light
BMW Ambient Light
Landrover Ambient Light
Mercedes Ambient Light
Porsche Ambient Light
BMW LED Speaker Cover
Volkswagen